Recycling extruderNext Generation Recyclingmaschinen GmbH
F:Gran 145-20
Recycling extruder
Next Generation Recyclingmaschinen GmbH
F:Gran 145-20
EXW Preço fixo acresce IVA
99 000 €
Ano de fabrico
2013
Condição
Usado
(funcionalidade limitada)
Localização
Bergen op Zoom 

Dados básicos
- Designação da máquina:
- Recycling extruder
- Fabricante:
- Next Generation Recyclingmaschinen GmbH
- Modelo:
- F:Gran 145-20
- Número da máquina:
- 12090
- Ano de fabrico:
- 2013
- Condição:
- necessita de reparação (usado)
- Funcionalidade:
- funcionalidade limitada
- Horas de funcionamento:
- 7 700 h
Preço e localização
EXW Preço fixo acresce IVA
99 000 €
- Localização:
- Bergen op Zoom, Países Baixos

Ligar
Detalhes da oferta
- ID do anúncio:
- A224-02837
- Número de referência:
- Z032
- Atualização:
- por último em 27.08.2026
Descrição
This is a recycling extruder with side feeding for materials (flakes, pellets, etc.). The system is supplied with a control cabinet and a double vacuum system. The pelletizing system is missing at the end of the screw – it is not included in the scope of supply. The cylinder ends at the flange. The extruder is supplied without a screw. The frequency inverter for the main motor was replaced with a new unit 3 years ago.
Installed power approx.: 474 kW
Cooling water requirement approx.: 190 l/min
Fresh water consumption approx.: 110 l/h
Feeding system:
• Diameter of the feeding screw: 200 mm
• Drive for the feeding screw: 45 kW, frequency-controlled
• Hopper capacity net 7 m³/250 ft³,
• Gear motor 3 × 3 kW
• 2 sight glasses in the hopper
• 2 level indicators
Extruder:
• Diameter of the extruder screw: 145 mm
• L/D ratio: 24
• Heating power: 50 kW
• Extruder drive unit 280 kW
Bsdpfx Ajznz Ezjbqoww
Vacuum 1:
• Screw length: 16 L/D
• Heating power: 40 kW
• Vacuum pump power: 11 kW
• Vacuum capacity: 225 m³/h
• Vacuum pressure: 33 mbar
Vacuum 2:
• Screw length: 16 L/D
• Heating power: 40 kW
• Vacuum pump power: 7.5 kW
• Vacuum capacity: 190 m³/h
• Vacuum pressure: 33 mbar
Cylinder:
• Cylinder: Bimetal extruder cylinder,
• Reinforcement layer 1.8–2.0 mm thick,
• Hardness 63–65 HRC
Installation conditions:
• Voltage: 3 × 400 Volts
• Permissible fluctuation max.: +5 % – 5 %
• Frequency: 50 Hz Permissible fluctuation max.: +4 % – 4 %
• Protective measure: Multiple grounding
• Ambient temperature: min. 15 °C, max. 35 °C
• Humidity max.: 90 %
• Altitude of the installation site: 0 – 1000 m
The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe.
The details for optimal transport need to be clarified. The machine price is without packaging.
O anúncio foi traduzido automaticamente. Podem ocorrer erros de tradução.
Installed power approx.: 474 kW
Cooling water requirement approx.: 190 l/min
Fresh water consumption approx.: 110 l/h
Feeding system:
• Diameter of the feeding screw: 200 mm
• Drive for the feeding screw: 45 kW, frequency-controlled
• Hopper capacity net 7 m³/250 ft³,
• Gear motor 3 × 3 kW
• 2 sight glasses in the hopper
• 2 level indicators
Extruder:
• Diameter of the extruder screw: 145 mm
• L/D ratio: 24
• Heating power: 50 kW
• Extruder drive unit 280 kW
Bsdpfx Ajznz Ezjbqoww
Vacuum 1:
• Screw length: 16 L/D
• Heating power: 40 kW
• Vacuum pump power: 11 kW
• Vacuum capacity: 225 m³/h
• Vacuum pressure: 33 mbar
Vacuum 2:
• Screw length: 16 L/D
• Heating power: 40 kW
• Vacuum pump power: 7.5 kW
• Vacuum capacity: 190 m³/h
• Vacuum pressure: 33 mbar
Cylinder:
• Cylinder: Bimetal extruder cylinder,
• Reinforcement layer 1.8–2.0 mm thick,
• Hardness 63–65 HRC
Installation conditions:
• Voltage: 3 × 400 Volts
• Permissible fluctuation max.: +5 % – 5 %
• Frequency: 50 Hz Permissible fluctuation max.: +4 % – 4 %
• Protective measure: Multiple grounding
• Ambient temperature: min. 15 °C, max. 35 °C
• Humidity max.: 90 %
• Altitude of the installation site: 0 – 1000 m
The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe.
The details for optimal transport need to be clarified. The machine price is without packaging.
O anúncio foi traduzido automaticamente. Podem ocorrer erros de tradução.
Documentos
Fornecedor
Nota: Registe-se gratuitamente ou faça login, para aceder a todas as informações.
Registrado desde: 2026
15 Anúncios online
Enviar pedido
Telefone & Fax
+43 660 2... anúncios
O seu anúncio foi eliminado com sucesso
Ocorreu um erro


























