Forging press

ARISA S4-1600-450-230-LDE

Total press force: 16,000 kN
Force application point before the PMI: 18 mm
Chjdozldwuepfx Ailed
Number of strokes adjustable continuously in automatic mode: 10 - 22 1/min
Slide stroke: 605 mm
Slide adjustment: 400 mm
Mold height (stroke downwards, adjustment upwards): 1300 mm
Table dimensions: 4500 × 2300 mm
Slide dimensions: 4500 × 2300 mm
Table height from the ground: 600 mm
Table stroke: T-Track
Transfer stroke: 0 - 1200 mm
Internal clearance of the guide shoulder for the clamping pins (min.): 800 mm
Internal clearance of the guide shoulder for the clamping pins (max.): 2400 mm
Lifting stroke: 0 - 280 mm
Cushions in the base (hydraulic): 2 pcs.
Positioning of both cushions: Motorized and adjustable
Cushion force: 300 - 2000 kN
Cushion stroke: 0 - 250 mm
Cushion surface area: 1600 × 950 mm
Pneumatic cushion in the slide: 2 pcs.
Cushion force in the slide: 55 - 550 kN
Maximum cushion stroke in the slide: 150 mm
Left slide cushion surface area: 1450 × 1600 mm
Right slide cushion surface area: 1300 × 1600 mm
Maximum weight of the upper part of the mold: 36,000 kg
Maximum total weight of the mold: 40,000 kg
Technical data for the CISAM line:
• Strip width: 300 - 1600 mm
• Strip thickness: 0.5 - 3.0 mm
• Tensile strength: 600 MPa
• Yield strength: 400 MPa
• Feed rate: 200 - 1300 mm
• Feed accuracy: ±0.1 mm
• Maximum feed cross-section: 4,000 mm²
• Strip entry height above the table: 500 - 800 mm
• Maximum coil weight: 25,000 kg
• Coil outer diameter: 900 - 1,855 mm
• Mandrel expansion range: 500 - 610 mm
• Nominal coil inner diameter: 610 mm
• Straightening rollers: 9 pcs.
• Straightening unit with cassette construction

O anúncio foi traduzido automaticamente. Podem ocorrer erros de tradução.