Silo semitrailer

O.M.E.P.S. CR 60 Vermietung möglich

OMEPS Tipping Silo Semi-Trailer – Rental Possible

Type: CR 60

Chassis:
Two fully automatically welded I-beam longitudinal girders with welded cross members, chassis width 1,400 mm, kingpin 2", tipping cylinder: Hyva

Axles and Suspension: Disc brake 22.5" SAF axle units, 3x 9t with air suspension. Axle spacing is 2 x 1,310 mm, lifting and lowering valve, load indicator on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring system, 1st axle liftable without steering gear, 3rd axle liftable with Wabco Optiturn

Rims and Tires: 6 wheels with tires size 385/65 R22.5, manufacturer's choice on Alcoa Dura Bright aluminum rims, 11.75 x 22.5, ET 120

Braking System: EBS 4S/2M WABCO air braking system with RSS, according to standard 98/12/CE - ECE R13/09, brake pad wear indicator connected

Landing Gear:
Mechanical landing gear with two speeds, 2x 20t support load with swivel foot, rear with crank supports

Electrical System:
All lights in LED design, 24-volt electrical system consisting of: one 15-pole socket in front of the fifth wheel mounted on the chassis carrier, yellow side marker lights in the prescribed number, position lights at the rear, outline lights at the front, license plate lights at the rear, lights according to standard 97/28/CE-2007/35/CE, 2 multi-chamber lights at the rear at the level of the turntable mounted on aluminum brackets according to standard 97/28/CE-2007/35/CE, 1 LED work light on the container, yellow warning light at the rear, at the level of the hose pipes, 2 reversing lights in the underrun protection, 2 reversing lights at the level of the supports (each can be switched off on the power console)

Container Design:
A horizontal container made of aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn), a 1-chamber container, with a volume of 60,000 liters. Warranty for the container: 24 months from delivery

Operating Parameters:
Pressure vessel according to standard Pressure Equipment Directive PED 97/23/CE. Wall thickness is approx. 5 mm, test overpressure 3.0 bar - operating overpressure 2.0 bar, operating temperature -40° to +80°

Filling Options: 5 manholes DN 450 with pivoting and folding dome lids. The dome lids are sealed with 4 wing nuts each, rubber support for the dome lid on top for storage, closed rain strip at the front - open at the rear

Material Outlet: 1 material outlet cone DN 800 made of INOX, foldable with INOX disc for loosening, material outlet cone can be pivoted to the side, shut-off valve DN 150, with white seal, connection: STORZ-A

Air Piping:
One 2.5" stainless steel air collector line mounted on the operating side RIGHT, a stainless steel air distribution pipe 4" is mounted at the rear of the container, air valves (shut-off valves) in INOX, upper air hose and air connection hoses are in 2" STORZ couplings, micron filter, vacuum valve at the top of the container, 1 vibrator 1m in front of the turntable

Ladder and Walkway:
1 aluminum ladder is mounted at the rear left of the vehicle, 1 aluminum safety handrail with a separate folding ladder section can be erected from below with a locking brake when opened, 1 aluminum safety walkway runs along the top left of the container, anti-slip coating on the container
Bwodpfxoy Ii Dzo Ailew

Hose Reel:
4 hose reel containers 5 m length DN 200 made of aluminum with 4 hoses DN 100 and STORZ couplings, hose container with compressor hose D.76

Accessories: The side underrun protection is made of anodized aluminum.

O anúncio foi traduzido automaticamente. Podem ocorrer erros de tradução.