Tipper semitrailer

STAS Agrostar 51,8 cbm

Kingpin load: National 12 t
Axle load: National 8 t
Axle spacing: 1310-1310 mm
Fifth wheel height: 1150 mm
Chassis width: 1400 mm
Internal height: Front 2165 mm
Internal height: Rear 2165 mm
Overall width: 2550 mm
Wheelbase: 6800 mm
Overall length: 10656 mm
Chassis material: Aluminum
Tires: 385/65R22.5
Loading length: 9665 mm
Axles: SAF
Brake type: SAF - SBS 2220
Offset: 120
Option: 1st axle with lift axle and traction aid
Activation of traction aid: Via a button in the truck (installation of the button is not included in the scope of delivery) and by pressing the brake pedal three times.
Brake pad wear indicator: Not connected
Tire pressure monitoring system (Tire Pilot) Without
Tire pressure monitoring: Wabco Trailerpulse
ECAS air suspension with raising and lowering valve
Air suspension lowering: Automatic lowering of the air suspension during tipping, manually lockable via smartboard and switch on the chassis
Pneumatic coupling head: European Palm coupling
Chrome wheel nut caps with STAS logo
Landing gear: Aluminum drop legs mounted at the front of the chassis, with individual controls on both sides, support force 20 t/P
Underrun protection control: Manual
Towing eye: 1x in the direction of travel
Underrun protection mud flaps: Black with STAS logo
Underrun protection cover: Handle on the underrun protection
EBS control panel: Control panel: In the direction of travel, in front of the axles
Toolbox position: On the left in the direction of travel, in front of the axles: Plastic
Toolbox dimensions: Left in front of the axles: 860 x 520 x 500
Type of fender: Domar STAS with white line
Number of mud flaps on the fender 2x
Mudguard type: Clear Pass
Lighting manufacturer: Aspöck
Lighting type: ECOLED II
Work lights (switch operated)
Position of work lights (switch operated)
2x LED reversing lights, front, left and right, in the area of the landing gear
Tilt cylinder manufacturer: Hyva
Tilt cylinder type: Hydraulic cylinder with large casing
Tilt cylinder model: Hyva - FC 169
Tilt cylinder stroke: 7130
Tilt cylinder max. pressure: 250
Surface treatment of cylinder stages: Standard surface treatment
Hydraulic coupling: Swivel coupling
Hydraulic coupling - size 1
Hydraulic coupling - gender: Female
Hydraulic coupling - hose 2,500 mm
Smartboard
Aluminum leaning ladder 3 m
Left-hand ladder attachment for rear entry: With hook for hanging
Position of broom and shovel holder: With 3 holders each, on the chassis on the left in the direction of travel
Loading pressure gauge Ø 100 mm - mounted on the front of the chassis
With two Plastic wheel chocks including bracket
Chassis safety device - body rubber pads
Air and electrical console, centered in the direction of travel, with boom
End wall inclination (°) 90
Rear wall inclination (°) 90
Rear wall type combi-door
Inner lower chord profile inclination (°) 90
Floor 8 mm aluminum - 110 Brinell
Position of rubber pads below the floor cross members
End wall 4 mm (aluminum)
Side wall profile 3 mm - 2 mm, smooth inside and outside, double-walled profiles 600 mm wide - 30 mm thick
Bsdpfjuar Amox Apbelp
Rear wall aluminum
Combi-door type 1/2 - 1/2 with pivoting door end cross member
Door leaf opening: Right door leaf opens first (STAS manufacturer's choice)
Door end cross member: Pivoting design
Hinge type: With double door hinge (double-joint hinge)
Slider: Rectangular design, standard
Slider position 2 sliders with operating handles, one each on the left and right in the direction of travel.
Securing the open door leaves. The

O anúncio foi traduzido automaticamente. Podem ocorrer erros de tradução.